- Bolt-on Axle Adapter
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
Surly Trailer Parts
• Used to retrofit new style hitch to older 12mm style • Must be combined with 1st knuckle from 15mm horizontal hitch
This adapter spaces out the Steel Hitch allowing bike frames with hooded/tight rear dropouts to have hitch clearance. This adapter is also used in breezer style dropout applications for proper hitch installation.
Replacement safety flag for extra visibility.
Burley's Travoy Tie Down Straps help you secure your cargo to your Burley Travoy trailer (sold separately). These straps, sold in pairs, can replace the straps that come standard with the Travoy trailer or they can be used for added stability.
These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. - Sold in pairs - Manufactured from 303 Stainless Steel - Includes stainless steel hardware for attaching to axle
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
Burley's Flex Connector joins the trailer to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily letting you lay down the bike. Includes safety strap and retaining pin.
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
Keep your Burley pet trailer (sold separately) stable and make loading and unloading your 4-legged family member super easy with this kickstand. It folds up and out of the way when it's time to go, too.
This Travoy hitch from Burley connects your Travoy trailer (sold separately) to your bicycle seatpost. Replace a lost hitch or get one for each bike in your quiver for convenience.
Burley's Travoy Rack Mount lets you connect your Travoy trailer to your bicycle rack rather than your seatpost (trailer, rack, and hitch sold separately).
Elastic net with adjustable hooks designed to fit Burley frame tubes. Quickly secures loose cargo and frequently accessed items. Especially useful with Burley Coho XC and Flatbed bike trailers. - Hooks fit Burley frame tubes - Hooks can attach to net at various points allowing flexibility in attachment
Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts
A skewer for your Surly Trailer.
- 4 piece sleeve set for Adams Trail-A-Bikes - Includes new shim for oversized seatposts that fits 25.4mm to 35.0mm and beyond
Surly Trailer Parts
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
• 4 times greater strength • Fits seatposts from 25.4mm to 35.0mm • Retro fittable to all 15mm block, horizontal pin style Trail-a-Bikes • Fits late 1998 to present • Comes with 4 shims
Have fun, rinse, and repeat! The Burley Floor Mat catches all the dirt, sand, snacks, and mud for easy clean-up. - Easy removal for a quick clean-up
This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14
At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation
Adaptors for Benno Boost E and Carry On allow for the use of Thule trailers.
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Keep your little one warm so your routine doesn't change when the weather does. • Super soft interior is plush next to your child’s skin. • Compatible with most 5-pt harness systems and systems that include a lap belt. • Velcro backing for a perfect fit with all Burley trailers and strollers. • Recommended for children ages newborn to 2-years old. • Machine-washable.
Find new horizons and discover new trails when you hitch your bike to a Coho XC cargo trailer using the Coho 5mm Skewer. Available in multiple lengths, simply replace your bike's current QR skewer with the Coho 5mm Skewer and you're ready to hit the trail. Note: The Coho 5mm Skewer is required for any bike with a QR skewer to connect to the Coho XC. This skewer will replace your bike's current skewer when using the Coho XC. Features: - Allows bikes with QR axles to connect to the Coho XC trailer - Quick and easy installation - Durable construction
A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC
Page 1 of 3 Next page