Filter By:
BMX
$1.00 - $22.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.
$5.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible
$5.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
$5.99
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer).
- Length: 4.4-inch
- Diameter: 1.6-inch
- Material: Plastic (Thermalite)
- Weight: 0.8- ounce each
- Replacement sleeve only
- Sold individually
$8.50 - $9.99
The Gost pads feature a unique design to make install and set up easier.
- Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame
- Assembly is simplified by lining up the rim and tightening a M6 female bolt
$8.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$8.99 - $9.99
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking.
- Custom inner frame helps to stiffen the pad, reducing braking power loss from flex
$9.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
$9.99 - $11.99
Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance.
- 160mm lenght
- Par Ends Included
$9.99 - $22.99
- Press fit designed to work the hub's non-drive side collar.
$9.99
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$9.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz).
- Black
- 60 – 65mm
$10.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.
$10.99
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike.
• 150mm Long, 27.8mm Diameter
• 30 durometer rubber
• Low flange design
• Includes WeThePeople nylon barends
$11.00 - $11.99
Cornerstone Grip features a ribbed design with Cornerstone logo.
- Includes Odyssey Par Ends
$11.99
The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort.
- 160mm
$12.49 - $21.99
- Threads onto 3/8" axles
- Double-sided
- Oversized
- Alloy
- Length: 3" / 74mm
- Width: .94" / 24mm
- Sold as a pair
$13.99
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut.
- 6061-T6 aluminum construction.
- Standard 1-1/8-inch size.
$14.99
- Steel
- Threads onto 3/8" axle
- Knurled & grooved
- Diameter: 33mm
- Sold in pairs
$14.99
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered.
Available in 14mm or 3/8?.
$15.99
- CNC machined 6061-T6 aluminum chain tensioners
- Compatible with 3/8 inch and 10mm axles
- Single bolt operation makes tensioning a simple task
- Material: 6061AL
$15.99
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration.
FEATURES
- Adjustable hanger slot allows upper cable to rotate for optimum alignment.
- The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex.
- Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh.
- All Odyssey Linear cables are offered with the K-Shield housing.
- Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included.
SPECS
- Housing length: 995mm
- Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended.
- Brake requirements: Open-ended U-brake arms.
- Works with most brake levers.
- Velcro strap included.
$17.99
The Silencer V2 has a lightweight 6061 aluminum core supports the entire sleeve. The sleeve is made from our proprietary Thermalite material and resists cracking and deformation while sliding better than chromoly on most surfaces. The lengthy 4.4" peg ensures you maintain locked into grinds.
- Axle: 3/8" with included 10mm adapter
- Diameter: 1.6"
- Length: 4.4"
- Weight: 5.3-ounce each
- Sold individually
$18.79
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Dual Cable
- Diameter: 1.5mm
$18.79
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Fits most
- Diameter: 1.5mm
$18.79
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Upper
- Length: 7.5 – 9.5-inch
- Diameter: 1.5mm
$18.79
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Upper
- Length: 11 - 12.5"
- Diameter: 1.5mm
$18.99
This plastic peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve.
- 1.5-inch outer diameter
- 14mm with 3/8-inch adapter
- Sold individually
- Weight: 7.6oz
- Replacement sleeves sold separately
$19.99 - $22.99
Odyssey Bluebird chain is the proven and reliable KMC 510-HX chain with an added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
- Proven and reliable KMC 510-HX chain
- Factory installed half-link for a radically stronger set-up
Page 1 of 3
Next page