Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle

-Wheels Mfg rubber donuts fit over your brake and shift cables preventing exposed cables from contacting frame and reducing cable slap noises

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Crank dust cap - Works with most three-piece crank models

Replacement small parts for Hope disc brake Hope disc brake calipers.

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Rubber - Color: Black

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

- w/Nut - 1-3/4-inch

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

- M8 Top Plate Nut

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Aheadset preload adjusting bolt

- Headset Microspacer - .25mm height each

- Aluminum w/lock nut and mount - Slotted mount design

- 8x1mm Allen head

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.